PTB90 Series (60L)

PTB90 is an accumulator head type blow molding machine, accumulator head volume are 6.6 liters. It is usually used for Jerrycans, Plastic models, road cones, toys blow molding within 60 liters. It is a single station single die head machine. Blow molding of raw materials such as PE, PVC, ABS, etc., Servo drive operation will be more stable, production speed is higher than 50 per hour.

Specifications Unit PTB90
Maximum container capacity L 60
Number of die heads Set 1
Machine dimension (L*W*H) M 5.7×2.6×4
Total weight Ton 13
Clamping Unit  
Clamping force KN 300
Clamping opening stroke mm 450-1050
Platen size mm 980×950
Maximum mold size (W*H) mm 720×1200
Mold thickness mm 460-600
Power Unit  
Maximum drive KW 52
Total power KW 66
Fan power KW 0.18×4
Air pressure MPA 1
Air consumption M3/min 0.8
Average energy consumption KW 26
Extruder Unit  
Screw diameter mm 90
Screw L/D Ratio L/D 24
Plasticizing capacity Kg/hr 140
Number of heating groups Groups 4
Extruder heating power KW 21.4
Extruder driving power KW 37
Die Head Unit  
Die head dimension m 2.15×0.9×0.55
Number of heating groups Groups 4
Head heating power KW 21.3
Maximum die pin diameter mm 350
Accumulator volume L 6.6
Parts Brand From
Touch screen Gefran Italy
Parision control system Gefran Italy
PLC control system Gefran Italy
Temperature control module Gefran Italy
Servo transducer Gefran Italy
Servo valve Atos Italy
Servo pump Sumitomo Japan
Motor servo Phase Italy
Hydraulic pump Daikin Japan
Hydraulic valve Yuken Japan
Hydraulic seal Valqua Japan
Intermediate relay Omron Japan
Frequency converters Emerson America
Pneumatic valve Airtac Taiwan
Pneumatic switch and contactor LG Korea