PTB100 Series (120L)

PTB100 is an accumulator head type blow molding machine, accumulator head volume are 12 liters. It is usually used for chemical drum, roadblocks, bus seats, automotive components and other products blow molding within 120 liters. Blow molding of raw materials such as PE, PVC, ABS, etc., Servo drive operation will be more stable, production speed is higher than 30 per hour.

PARAMETER:
Specifications Unit PTB100
Maximum container capacity L 120
Number of die heads Set 1
Machine dimension (L*W*H) M 6.2×2.8×4.5
Total weight Ton 14
   
Clamping Unit  
Clamping force KN 360
Clamping opening stroke mm 350-1200
Platen size mm 1020×1060
Maximum mold size (W*H) mm 780×1260
Mold thickness mm 360-600
   
Power Unit  
Maximum drive KW 60
Total power KW 78
Fan power KW 0.18×5
Air pressure MPA 0.8
Air consumption M3/min 0.8
Average energy consumption KW 35
   
Extruder Unit  
Screw diameter mm 100
Screw L/D Ratio L/D 24
Plasticizing capacity Kg/hr 140
Number of heating groups Groups 5
Extruder heating power KW 25.1
Extruder driving power KW 45
   
Die Head Unit  
Die head dimension m 2.45×1.0x0.64
Number of heating groups Groups 5
Head heating power KW 26
Maximum die pin diameter mm 450
Accumulator volume L 12
     
CONFIGURATION:
Parts Brand From
Touch screen Gefran Italy
Parision control system Gefran Italy
PLC control system Gefran Italy
Temperature control module Gefran Italy
Servo transducer Gefran Italy
Servo valve Atos Italy
Servo pump Sumitomo Japan
Motor servo Phase Italy
Hydraulic pump Daikin Japan
Hydraulic valve Yuken Japan
Hydraulic seal Valqua Japan
Intermediate relay Omron Japan
Frequency converters Emerson America
Pneumatic valve Airtac Taiwan
Pneumatic switch and contactor LG Korea
Scroll to Top