PTB120 Series (200L)

PTB120 is an accumulator head type blow molding machine, accumulator head volume are 25 liters. It is usually used to customize some medium and large irregular products within 200 liters, such as folding table, children’s slide, floating pontoon bridge and so on. Raw materials can used PE, PVC, ABS, etc., Servo drive operation will be more stable, production speed is higher than 15 per hour.

Specifications Unit PTB120
Maximum container capacity L 200
Number of die heads Set 1
Machine dimension (L*W*H) M 9.1×3.6×5.6
Total weight Ton 45
Clamping Unit  
Clamping force KN 1500
Clamping opening stroke mm 600-2100
Platen size mm 1400×1900
Maximum mold size (W*H) mm 1600×1900
Mold thickness mm 610-750
Power Unit  
Total power KW 152
Hydraulic drive power KW 37
Air pressure MPA 1.0
Air consumption M3/min 1.0
Average energy consumption KW 82
Extruder Unit  
Screw diameter mm 120
Screw L/D Ratio L/D 24
Plasticizing capacity Kg/hr 280
Number of heating groups Groups 6
Extruder heating power KW 32
Extruder driving power KW 90/110
Die Head Unit  
Number of heating groups Groups 6
Head heating power KW 39
Maximum die pin diameter mm 500
Accumulator volume L 30/40
Parts Brand From
Touch screen Gefran Italy
Parision control system Gefran Italy
PLC control system Gefran Italy
Temperature control module Gefran Italy
Servo transducer Gefran Italy
Servo valve Atos Italy
Servo pump Sumitomo Japan
Motor servo Phase Italy
Hydraulic pump Daikin Japan
Hydraulic valve Yuken Japan
Hydraulic seal Valqua Japan
Intermediate relay Omron Japan
Frequency converters Emerson America
Pneumatic valve Airtac Taiwan
Pneumatic switch and contactor LG Korea