PTWT Series (Water Tank)

PTWT1000/2000/5000 is a special equipment used to produce 200 liters to 5000 liters water storage tank , accumulator head volume are 35/60/150 liters, Raw materials usually used HMWHDPE, Servo drive operation will be more stable, production speed around 4 to 25 per hour.

PARAMETER:
Specifications Unit PTWT1000
Maximum container capacity L 1000
Die head layer Layers Single layers
Machine dimension (L*W*H) M 8×5.6×6.5
Productivity PCS/HR 16-25
Total weight Ton /
 
Clamping Unit  
Clamping force KN 800
Clamping opening stroke mm 1500
Platen size mm 1500×1600
Maximum mold size (W*H) mm 1200×1500
Distance between plates mm 900-2400
 
Power Unit  
Fan power KW 200
Hydraulic drive power KW 45+7.5
Air pressure MPA 0.8
Air consumption M3/min 1.0
Average energy consumption KW 110
 
Extruder Unit  
Screw diameter mm 120
Screw L/D Ratio L/D 28
Plasticizing capacity Kg/hr 300
Extruder heating power KW 5.5
Extruder driving power KW 90
 
Die Head Unit  
Head heating power KW 40
Maximum die pin diameter mm Customized
Accumulator volume L 35
 
 
Specifications Unit PTWT2000
Maximum container capacity L 2000
Die head layer Layers Single layers
Machine dimension (L*W*H) M 8x6x7.2
Productivity PCS/HR 10-24
Total weight Ton /
 
Clamping Unit  
Clamping force KN 1800
Clamping opening stroke mm 2000
Platen size mm 1900×2000
Maximum mold size (W*H) mm 1600×2000
Distance between plates mm 1000-3000
 
Power Unit  
Fan power KW 260
Hydraulic drive power KW 45+7.5
Air pressure MPA 0.8
Air consumption M3/min 2.3
Average energy consumption KW 140
 
Extruder Unit  
Screw diameter mm 130
Screw L/D Ratio L/D 28
Plasticizing capacity Kg/hr 400
Extruder heating power KW 5.5
Extruder driving power KW 110
 
Die Head Unit  
Head heating power KW 60
Maximum die pin diameter mm Customized
Accumulator volume L 60
 
 
Specifications Unit PTWT5000
Maximum container capacity L 5000
Die head layer Layers Single layers
Machine dimension (L*W*H) M 10x8x8.8
Productivity PCS/HR 4-18
Total weight Ton /
 
Clamping Unit  
Clamping force KN 3000
Clamping opening stroke mm 2200
Platen size mm 2400×2500
Maximum mold size (W*H) mm 1840×2500
Distance between plates mm 1600-4000
 
Power Unit  
Fan power KW 460
Hydraulic drive power KW 55+7.5
Air pressure MPA 0.8
Air consumption M3/min 2.3
Average energy consumption KW 290
 
Extruder Unit  
Screw diameter mm 150
Screw L/D Ratio L/D 28
Plasticizing capacity Kg/hr 1000
Extruder heating power KW 6
Extruder driving power KW 132
 
Die Head Unit  
Head heating power KW 90
Maximum die pin diameter mm Customized
Accumulator volume L 150
 
CONFIGURATION:
Parts Brand From
Motor Siemens Germany
Frequency converters Siemens Germany
Gearbox Guomao China
Transducer Gefran Italy
Linear guide Hiwin Taiwan
Sealing ring Dz Taiwan
Hydraulic valve Yuken Japan
Hydraulic pump Yuken Japan
Servo controller Inovance Japan
Touch screen Siemens Germany
Temperature control module Siemens Germany
Parision control system Moog America
Air switch Schneider France
Contactor Schneider France
Pneumatic valve Airtac Taiwan