PTB70L Series (12L)

PTB70L blow molding machine is used to produce jerrycans, chemicals cans, small toys, Auto pipes within 12 liters. It is a single station equipment capable of assembling up to tetra-die heads. Blow molding of raw materials such as PE, PP, PVC, etc., single cavity production speed is higher than 85 per hour.

PARAMETER:

SPECIFICATIONS UNITS PTB70L
Max container capacity L 10
Number of die heads Set 1
Machine dimension (L*W*H) M 3.6*2.2*2.5
Total weight Ton 6.7
CLAMPING UNIT
Clamping force KN 125
Platen opening stroke mm 200-600
Platen size mm 550*580
Max mould size (W*H) mm 600*600
Mould thickness mm 210-350
POWER
Max drive KW 44.5
Total power KW 81.5
Fan power for screw KW 0.14*3
Air pressure Mpa 0.7
Air consumption M3/min 0.9
Average energy consumption KW 23
EXTRDER UNIT
Screw diameter mm 70
Screw L/D ratio L/D 24
Plasticizing capacity Kg/hour 80
Number of heating zone Zone 3
Extruder heating power KW 14.2
Extruder driving power KW 22
DIE HEAD
Number of heating zone Zone 3*4
Power of die heating KW 6.5
Max die pin diameter mm 180
Center distance of double die mm 260
Center distance of four die mm 120

CONFIGURATION:

PARISION CONTROL SYSTEM GEFRAN ITALY
TEMPERATURE CONTROL MODULE GEFRAN ITALY
HYDRAULIC PUMP YUKEN JAPAN
HYDRAULIC VALVE YUKEN JAPAN
HYDRAULIC OIL SEAL VALQUA JAPAN
INTERMEDIATE RELAY OMRON JAPAN
INVERTER EMERSON USA
PNEUMATIC VALVE AIRTAC TAIWAN
HUMAN-MACHINE TOUCH SCREEN GEFRAN ITALY
PNEUMATIC SWITCH & CONTACTOR LG KOREA
HYDRAULIC MOTOR & SCREW MOTOR ENERGETIC-OX CHINA
Scroll to Top